--> 

English version


SPARTUS®
MasterMIG 250 DUAL PULSE SYNERGY



MULTOPROCESS, SYNERGIC MIG WITH DOUBLE PULSE


1 / 6



The possibility of a professional TIG LIFT
welding with microswitch torch.



The possibility of use SPARTUS® Spool Gun
with built-in wire feeder. More...
spool gun

Technical parameters

Input ~3× 400V ± 10% 50 / 60 Hz
Welding current MIG [A] 15 – 250
Duty cycle 60[%] 250[A] 100[%] 195[A]
MIG PARAMETERS
Output working voltage MIG [V] 14.8 – 26.5
Wire feeder built-in, 4-roll gear
Wire feeding speed [m/min] 1,5 – 24
Wire diameter ∅ [mm] 0.8 / 1.0 / 1.2
Synergic MIG/MAG programs tak
1P - with pulse 20 programs
2P - with dual pulse 20 programs
SYNERGY - without pulse 17 programs
Pulsation/dual pulsation tak
Dual pulse regulation tak
dPC (pulse current delta) 10 – 200[%]
FdP (Frequency 2P) 0,5 – 3,0[Hz]
dut (double pulsation width) 10 – 90[%]
bAL (arc length of the current) -10 – +10
Spot welding tak
Welding inductance adjustment -10 – +10
Operating mode 2T/4T/s4T
Operating mode s4T tak
SCP (initial current) 10 – 200[%]
SAL (initial current arc length) -10 – +10
ECP (final current) 10 – 200[%]
EAL (final current arc length) -10 – +10
SFt Slow Feed 0 - 10
Burn Back 0 - 10
Pre-Gas/Post-Gas 0 - 5s / 0 - 10s
SPOOL GUN tak
TIG PARAMETERS
TIG welding current [A] 10 – 250
Arc ignition Lift
dSL Time of current descent [s] 0 – 10
MMA PARAMETERS
Welding with MMA coated electrode tak
MMA welding current [A] 10 – 250
ACF / HSt Arc Force/Hot Start 0 - 10 / 0 - 10
VRD 15,5
OTHER
Current consumption [A] MIG 15,1/ MMA 18,2/ TIG 13,3
Power factor (cosφ) 0,70
Efficiency η [%]85
Insulation classH
Protection classIP23
Weight [kg]25,5
Dimensions [mm]670 × 240 × 450
download programs card Click on photo to enlarge Click on photo to enlarge Click on photo to enlarge Click on photo to enlarge Click on photo to enlarge Click on photo to enlarge

Description:

SPARTUS® MasterMIG 250 Dual Pulse Synergy is a modern multi-functional inverter device for welding with MIG/MAG, TIG and MMA methods. During its production, modern technologies were used, such as: IGBT transistors, PWM, MCU control system. The device is powered from a 400V three-phase network and enables welding with a current of up to 250A for all three methods.

MasterMIG 250 Dual Pulse Synergy have a number of modern functions necessary for high-performance and high-quality MIG/MAG welding of materials such as steels, stainless steels, acid-resistant steels and aluminum alloys. It will be used especially when welding aluminum and its alloys, thanks to the use of advanced functions, dedicated to welding demanding alloys.

The most important functions:

Examples of applications: workshop work, renovation works in the field, automotive - welding of galvanized car bodies (brazing), silencer welding, production sector, light industry.

1P (Pulse) - MIG/MAG welding with pulsation, which significantly facilitates obtaining a spray arc

2P (Dual Pulse) - MIG/MAG welding with double pulsation

•Welding in two operating modes 2T/4T

•Spot welding

The use of double pulsation in the MIG/MAG method allows obtaining a weld of quality and aesthetics comparable to the TIG method. The benefits of using double pulsation in the MIG/MAG method:

•High aesthetics (husk effect)

•Higher welding efficiency compared to the TIG method

•Smaller thermal deformations compared to the TIG method

•When welding aluminum requires less skill from the operator in relation to the TIG method

Simple to use and intuitive function panel allows precise control of parameters for MIG/MAG, TIG and MMA methods. For the MIG/MAG methods it is possible to smoothly adjust the welding parameters such as: welding voltage, wire feed speed, inductance. In addition, the device is equipped with synergic programs in which the parameters are programmed - according to the welding mode and the material being welded.

MasterMIG 250 Dual Pulse Synergy is equipped with a professional four-roll wire feeder, which allows you to work with a long welding handle regardless of the type of wire used. Despite the small compact size and weight, the device is compatible with standard spools with welding wire D200 and D300 weighing up to 15kg.

Examples of applications: workshop work, renovation works in the field, automotive - welding of galvanized car bodies (brazing), muffler welding, production sector, light industry, high-performance aluminum welding.

Device SPARTUS® MasterMIG 250 DUAL PULSE SYNERGY:

Device SPARTUS® MasterMIG 250 Dual Pulse Synergy

3m work clamp

Gas hose

User's manuals

Package price [EUR]:

cena

SPARTUS® MasterMIG 250 DUAL PULSE SYNERGY package:

Device SPARTUS® MasterMIG 250 Dual Pulse Synergy

MIG gun SPARTUS® SPM 240

3m electrode holder

3m work clamp

Gas hose

User's manual

Package price [EUR]:

cena

NOVELTY! Choose the length of the MIG gun yourself!
The price of the package includes the option of choosing a 3-, 4- or 5-meter MIG gun.

Lack of information results in random length selection.

SPARTUS® EasyMIG 210E

SPARTUS® EasyMIG 220E Pulse Synergy

SPARTUS®
MasterMIG 200PFC

SPARTUS®
MasterMIG 250PFC SYNERGY

SPARTUS®
MasterMIG 250 DUAL PULSE SYNERGY

SPARTUS® MasterMIG315C

SPARTUS®
MasterMIG 250W DUAL PULSE SYNERGY

SPARTUS® MIG420H

SPARTUS® MIG420HW

SPARTUS®
MIG500W SYNERGY

SPARTUS®
ProMIG 500 DUAL PULSE SYNERGY

Home page Contact Site map