--> 

English version




SPARTUS®
EasyMIG 210E



MIG 3in1 with synergic MIG/MAG welding

1 / 4

Technical parameters

Input ~1× 230V ± 10% 50 / 60 Hz
Welding current MIG [A] 50 – 200
Duty cycle MIG [%] 30
MIG PARAMETERS
Output working voltage MIG [V]16,5 – 24
Wire feeding speed [m/min] 2 – 12,5
Wire feeder builid-in, 2 - roll gear
Welding wire spool [mm] ≤ 5[kg], Ø200
Wire diameter Ø [mm] 0.6 / 0.8 / 1.0
2T/4T switch tak
Inductance control tak
Wire test tak
Synergy tak
Manual correction to synergy tak
MIG/MAG polarization change tak
TIG PARAMETERS
TIG welding tak
Welding current TIG [A] 10 – 200
Duty cycle TIG [%]30
MMA PARAMETERS
MMA welding tak
Welding current MMA [A] 10 – 160
Hot Start tak
Arc Force tak
VRD tak
Duty cycle MMA [%] 60
OTHER
Max. current consumpiton [A] MIG: 35 / TIG: 26 / MMA: 33
Power factor (cosφ) 0,76
Efficiency η [%] 85
Insulation classF
Protection classIP21S
Weight [kg]12,5
Dimensions [mm]490 × 300 × 210
Network security (fuse) [A]25
Click on photo to enlarge Click on photo to enlarge Click on photo to enlarge Click on photo to enlarge

Description:

SPARTUS® EasyMIG 210E is a modern, inverter welding semi-automatic device, based on IGBT transistors. It enables welding by means of a consumable electrode shielded by inert (MIG) or active (MAG) gases, welding with coated electrode (MMA) and TIG lift welding. In addition, the device thanks to the ability to change the polarity of welding, enables welding with flux cored welding wire without gas.

The maximum welding current for the MIG / MAG / TIG method is 200A. For the MMA welding method it is 160A. The unit is powered from single-phase network 230V.

The device is equipped with synergistic programs for MIG / MAG welding with steel wires in the range diameter 0,6 / 0,8 / 1,0 mm. In addition, the device has an ability to manually adjust set parameters.

Thanks to the use of modern technological solutions, the welder is equipped with a number of functions supporting the welding process:

2T / 4T - possibility to choose one of two operating modes (MIG/ MAG)

Ind - welding inductance control - (MIG / MAG)

Hot - Hot Start, an easier electrode ignition (MMA)

Force - Arc Force, an easier welding in forced positions (MMA)

VRD - reduced no-load voltage (MMA)

The high-grade two-roller wire feeder provides stable feeding of steel wire, stainless steel wire and aluminium wire. Stable output parameters guarantee proper weld quality.

Examples of use: workshop, portable repair, automotive, exhaust silencer welding.

Package equipment:

EasyMIG 210E device

MIG gun SPARTUS SPE 150 3m

MIG toolbox (consumable kit)

Passive helmet SPARTUS Easy with flap

Electrode holder

Work clamp

Gas hose with bands

User’s manual

Package price [EUR]:
cena

SPARTUS® EasyMIG210E

SPARTUS® EasyMIG 220E Pulse Synergy

SPARTUS®
MasterMIG 200PFC

SPARTUS®
MasterMIG 250PFC SYNERGY

SPARTUS®
MasterMIG 250 DUAL PULSE SYNERGY

SPARTUS® MasterMIG315C

SPARTUS®
MasterMIG 250W DUAL PULSE SYNERGY

SPARTUS® MIG420H

SPARTUS® MIG420HW

SPARTUS®
MIG500W SYNERGY

SPARTUS®
ProMIG 500 DUAL PULSE SYNERGY

Home page Contact Site map